OPTIONAL ACCESSORIES

A - VEE-NAIL™ BRAND FASTENERS - Vee-nail fasteners are packed in individual boxes of 5,000 except for the 5/8" size which are packed in boxes of 2,500. Hardwood fasteners are available in 1/4", 3/8" and 1/2" sizes. Specify when ordering as "Hard". For all models except VN-J.

ITEM NO......DESCRIPTION.....PER THOUSAND COST.....QUAN PER BOX.....PER BOX PRICE

V14S..... 1/4" (6MM ) VEE-NAIL..... $6.30M..... 5,000..... $ 31.50

V38S..... 3/8" (10MM) VEE-NAIL..... $7.10M..... 5,000..... $ 35.50

V12S..... 1/2" (13MM) VEE-NAIL..... $7.80M..... 5,000..... $ 41.00

V58S..... 5/8" (16MM) VEE-NAIL..... $8.40M..... 2,500..... $ 21.00

A - VEE-NAIL™ BRAND FASTENERS - For model VN-J only. Vee-nail fasteners are packaged loose in quantities of 1,000. Fastener count is approximate and determined by weight. Hardwood fasteners are available in 1/4", 3/8" and 1/2" sizes.Specify when ordering as "Hard".

ITEM NO. DESCRIPTION PER THOUSAND COST   PER BAG PRICE

V14L 1/4" (6MM) VEE-NAIL $12.35M $ 12.35

V38L 3/8" (10MM) VEE-NAIL $12.95M $ 12.95

V12L 1/2" (13MM) VEE-NAIL $13.75M $ 13.75

V58L 5/8" (16MM) VEE-NAIL $14.50M $ 14.50

B - AUTOMATIC RABBET CLAMP - Designed to provide additional clamping capability for picture frame like materials. May be shut off when not required. Quick width adjustments via ratchet handle. For models VN-A & VN-FA only (S-6488-VN) $ 385.00

C - FILTER-REGULATOR-LUBRICATOR - Three units combined into one practical efficient package. Provides a filter to remove dirt and water in the incoming air line. Provides a regulator to adjust air pressure to suit the machine and lastly provides an oiler to disperse a lubricant into the airflow to lubricate the air components on the machine. For model VN-B, VN-A2, VN-FA2 & VN-FA3 only (NAC3000-NO3G-3) $ 180.00 

Automatic drain assembly for filter bowl, drains by liquid level, for all models (NAD43) $ 85.00. 

PNEUMALUBE™ pneumatic systems lubricant, one gallon (PNEUMALUBE) $ 25.75

D - GLUE DISPENSER - Semi automatic cold glue dispenser for use with all pneumatic models or where compressed air is available. Designed for use with DURABOND™ high performance glue for miter joints (GL-CA) $ 385.00

DURABOND™ high performance polyvinyl acetate high solids water soluble glue, one gallon
$ 25.75

E - CABINET STAND - Self contained sheet metal cabinet stand for model VN-B only. Allows machine to be operated from front or rear. Table height is 35" from floor (S-6514-VNS) $ 295.00

F - FLOOR STAND - Models VN-A2, VN-FA2 and VN-FA3 are designed as bench models. For those requiring separate free standing floor stand. Floor stand is height adjustable from 34" to 40" and is provided with full 360 degree swivel for horizontal use corner up or corner down to suit operator.Swivels upside down for easy repairs and maintenance. Floor stand requires minor assembly taking between 15 and 30 minutes (NVN00069) $ 325.00

Optional adjustable back rest for use only in conjunction with the above floor stand. Shown in use on page 4 of bulletin VN2 $ 160.00

G - OPTIONAL FENCES - Special removable fences to assemble octagon or hexagon frames. For all models except VN-J, VN-A2, VN-FA2 & VN-FA3.

For model VN-M (hexagon or octagon - specify) (7205-VNM) $ 185.00

For models VN-B & VN-S (hexagon or octagon - specify) (7206-VNS) $ 150.00

For models VN-A & VN-FA (octagon only) (7207-VNA) $ 325.00

H - MANUAL OVERIDE CIRCUIT - Designed for use exclusively on models VN-FA2 and VN-FA3. Customized operating circuit allows the machine to be used in its normal fully automatic mode or at the flip of a switch, the machine can be used in the manual mode exactly the same as the model VN-A2.

Ideal for applications requiring both high production of standard size frames and short run custom frame jobs (7342) $ 195.00

I - OPTIONAL ELECTRICS - Replaces standard electrics. For models VN-A2, VN-FA2 & VN-FA3 only. 230 volt, 1 phase, 50/60 cycle $ 85.00

J - EXPORT PACKING - Machine wrapped in protective plastic and packed in a sealed shipping container.

For model VN-J only $ 55.00

For model VN-B only $ 110.00

For models VN-M & VN-S only $ 135.00

For models VN-A2, VN-FA2 and VN-FA3 only $ 85.00

For models VN-A & VN-FA only $ 145.00

Note :

1 - All prices are FOB factory, Hauppauge, New York.

2 - All shipments are made freight collect. Add 10% service charge on all prepaid shipments.

3 - All prices and specifications are subject to change without notice.

4 - Installation or set up is not included.

5 - Consignee has the sole responsibility to provide or arrange suitable unloading facilities.

6 - Subject to the terms and conditions as contained in our literature and acknowledgement or      order.

7 - All sales are made in accordance with our standard warrantee.

8 - Terms; 30% deposit with order, balance on delivery.

     Visa® - MasterCard® - American Express® credit cards accepted for qualified purchasers.

9 - Long term lease/purchase plans on favorable terms may be available through a third party.