Main Menu
Untitled Document



  Mitre Saws

  CTD Saws

     D45A
     D45F
     D20
     N90
     Chopper

  Pistorius

     MN
     EMN
     MNA
     BMS
     Chopper

  Frame Sqaure

     Delux
     Rabbett2

  ITW AMP

     T-350

 


PISTORIUS - MACHINE CO., INC.


MODELS MN-100, 200, 300,
Heavy Duty Pneumatic Pivot Head Models,
for High Speed, Semi-Automatic Production
 
 
Features

  • Designed for the production oriented operation when     compressed air is available

  • Compressed air does all the work and allows for high speed
        cycling on a continuous basis

  • Ideal for all types of flat and compound miter cutting

    		•



    		 
     
    Typical Uses


  • Advertising display frames

  • Solar panels

  • Clocks

  • Shower enclosures

  • Outside aluminum storage sheds

  • Door lites

  • Sliding patio doors

  • Picture & mirror frames

  • Vinyl & aluminum skylights

  • Kitchen cabinet doors

  • Plastic and aluminum skylights

  • Photo frames

    		•



  • Chalk boards

  • Needlepoint frames

  • Schedule & bulletin boards

  • Medicine cabinet doors

  • Architectural sash

  • Portable offices & trailers

  • Game tables

  • Telephone booths

  • Greenhouses

  • Outside service windows

  • Curtain walls

  • Ventilators & grills
    		•   
     

    Specifications

    Miter Cutting Capacity :

  • Model MN-100
        2 5/8 {67 mm} wide x 2 5/8 {76 mm} high

  • Model MN-200
        3 5/16 {84 mm} wide x 2 5/8 {67mm} high

  • Model MN-300
        4" {102 mm} wide x 2 5/8 {67} high






    		•  
      NOTE : When cutting narrow material that is higher than the capacities listed above, additional             capacity is available. When cutting to the full width capacity listed, some height cutting             capacity is lost. For actual cutting charts and specifications please contact the factory.

    		  
     

    Motor :

    1 1/2 horsepower 208-230, 460 volt, 3 phase, 60 Hz, 3600 RPM totally enclosed fan cooled, constant torque. When run at Hz RPM is reduced to 2950. Note: Standard motors will run at 208 volts or up to a 10% variation from rated voltage.

    Drive :
    Non-slip timing belts

    Arbor :

    5/8 {15.88 mm} standard.

    Table Height :
    35 1/2" from floor {902mm}


    AMPS :

  • 1 1/2HP - 208 volts, 3 phase, 60 Hz - 10.0

  • 1 1/2HP - 230 volts, 3 phase, 60 Hz - 8.7*

  • 1 1/2HP - 460 volts, 3 phase, 60 Hz - 4.4

  • 1 1/2HP - 240 volts, 3 phase, 60 Hz - 11.0

  • 1 1/2HP - 230 volts, 1 phase, 60 Hz - 20.0

  • 1 1/2HP - 220 volts, 1 phase, 60 Hz - 22.0

  • 1 1/2HP - 380 volts, 3 phase, 60 Hz - 5.3

  • 1 1/2HP - 575 volts, 3 phase, 60 Hz - 3.5

  • 3HP - 230 volts, 3 phase, 60 Hz - 7.4

  • 3HP - 460 volts, 3 phase, 60 Hz - 3.7


    • * Standard motor supplied with machine


    Switch :

    IEC size A, Magnetic starters mounted in a common NEMA 12 dust tight enclosure with recessed start switch and extended stop switch. Control circuit operates on 24 volt and a pilot light indicates the machine is running.


    Blade Capacity :     {sawblade not included}

  • MN-100-10"OD{254mm}

  • MN-200-12"OD {305mm}

  • MN-300-14"OD{356mm}

    •

    Sawdust Exhaust : {optional accessory}
    Two 4"OD. requires approx. 400 CFM per outlet.

    Production Rate : .......Up to 60 cycles per minute with infinite feed control. Actual production rate varies with requirements of specific application.


    Weight : {Without accessories or gages}
    Crated {domestic}...651 lbs.-{296 kg}
    Crated {export}.......676 lbs.-{307 kg}
    Uncrated..................551 lbs.-{250 kg}

    Air Consumption : {3/8 air line minimum}
    1.5 CFM at 65 PSI based on 15 cycles per minute.

    Air Pressure : ...65 PSI 4.5 {BAR}

    Actuation :
    Air valve, fully guarded, foot operated. spring return.

    		 
     

    		 
       
         
      Footer
    Home  |  Contact Us  |  Sitemap 
     
    Copyright © 2003 Ultramitre. All rights reserved.