Ultramitre - Equipment ~ Mitre Saws ~ CTD Saw

Main Menu

Untitled Document

  Mitre Saws

  CTD Saws

   D45A
     D45F
     D20
     N90
     Chopper

  Pistorius

   MN
     EMN
     MNA
     BMS
     Chopper

  Frame Sqaure

   Delux
     Rabbett2

  ITW AMP

   T-350

CTD Model N90 16"
Vertical Frame & Notching Saw

The Model N90 has been designed for a variety of heavy duty cutting applications, such as 45° double mitre cutting, notching of aluminum and plastic extrusions, or toe-notching of wood
panels. This heavy duty machine can have blades set for notching or mitering. Blades move vertically on linear bearings on 1-1/4" (32mm) diameter hardened and ground rods.Keyed fences allow for each set-up and accurate dimensional changes.

Standard Features & Specifications :

Blade Capacity :
16" OD (406mm); saw blades not included.
18" OD (457mm); optional

Arbor :
1" (25mm) with 3-1/2" (89mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive; 2800 RPM of spindle.

Model N90 Toe-Notch Configuration

Motors & Voltages :
Two, 3 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors, 60 Hz, 1725 RPM with Dual Magnetic Starter; 5 H.P. Motors available.

Table Base :
Precision machined and ground iron castings with milled keyways to guide fences; allows for easy and accurate dimensional changes.

Floor Stand :
Heavy gage steel; stand is completely enclosed with 6" (152mm) dust collector outlet and scrap chute; 1200 CFM required.

Slide and Spindle View,
Blade Guard Removed

Actuation : Air operated by foot valve with cover.

Air Pressure & Consumption :
6 CFM at 100 PSI (.17 cubic meters/minute at 7.03 kg/cm2) based on 6 strokes per minute; includes air filter/ regulator/lubricator with auto drain.

Size & Weight :
Standard Toe-Notch Machine
42" (107cm) Wide x 42" (107cm) front to back x 62" (157cm) High; Weight 900 lbs. (410kg).

Production Rate :
Up to 10 strokes per minute.

Rear View with Dust Cover Removed

Cutting Capacity :
Staggered Saw Blades/ Toe-Notch Configuration;
6" (152mm) x 6" (152mm) Deep x 4" (102mm) High

Mitre Cutting/Staggered Saw Blades;
4-1/8" (105mm) Wide x 4" (102mm) High

Mitre Configuration/Non-Staggered Saw Blades;
4" (102mm) Wide x 4" (102mm) High; up to 6" (152mm)
High with special blade guard modification at extra charge.

Blade close-up
with Keyed Fences

CTD Saw »

Footer

Home | Contact Us | Sitemap

CTD Model N90 16" Vertical Frame & Notching Saw

CTD Model N90 16"
Vertical Frame & Notching Saw