| OPTIONAL
ACCESSORIES |
| |
1a. |
Special
Motors/Electrics - Replaces standard motors and switches.
For models EMN-12 and EMN-12 and EMN-14 only |
|
| |
|
|
| |
1 - |
220
volt, 1 phase, 50 cycle, 2950 RPM motors with appropriate size
magnetic starters |
$
200.00 |
| |
2
- |
230/460
volt, 3 phase, 60 cycle, 3450 RPM motors with appropriate size
magnetic starters |
$
275.00 |
| |
3
- |
380 volt,
3 phase, 50 cycle, 2950 RPM motors with appropriate size magnetic
starters |
$
275.00 |
| |
4 - |
575/600
volt, 3 phase, 60 phase, 3450 RPM motors with appropriate size
magnetic starters |
$
275.00 |
|
|
|
1b. |
SPECIAL
MOTORS/ELECTRICS - Replaces standard motors and switched.
For all models except EMN. |
|
| |
|
|
| |
1 - |
230 volt,
1 phase, 60 cycle, 3450 RPM motors with appropriate size magnetic
starters |
$
465.00 |
| |
2
- |
220 volt,
1 phase, 50 cycle, 2950 RPM motors with appropriate size magnetic
starters |
$
465.00 |
| |
3
- |
575/600
volt, 3 phase, 60 cycle, 3450 RPM motors with appropriate magnetic
starters |
$
270.00 |
| |
4
- |
240/380
volt, 3 phase, 50 cycle, 2950 RPM motors with appropriate size
magnetic starters |
$
240.00 |
| |
5 - |
380 volt,
3 phase, 50 cycle, 2950 RPM motors with appropriate size magnetic
starters |
$
210.00 |
| |
6
- |
2 horsepower,
230/460 volt, 3 phase, 60 cycle, 3450 RPM motors with appropriate
size magnetic starters |
$
465.00 |
| |
7
- |
3 horsepower,
230/460 volt, 3 phase, 60 cycle with appropriate size magnetic
starters, includes polyvee drive with idlers |
$
510.00 |
|
|
|
2. |
PHASE
CONVERTER - Electric phase converter, permits operation
of 230 volt, 3 phase motors on 230 volt, 1 phase current.
Operates on 50/60 cycle. Converter causes approximately a
30% loss of motor efficiency (horsepower). Not for all motors
check with factory for suitable applications....................................................................(PAM-600-HD) |
$
395.00
|
|
|
|
3. |
FILTER-REGULATOR-LUBRICATOR
- Three units combined into one practical, efficient
package. Provides a filter to remove dirt and water in the
incoming air line. Provides a regulator to adjust air pressure
to suit the machine and lastly provides an oiler to disperse
a lubricant into the air flow to lubricate the air components
on the machine. A combination sleeve type shut-off valve with
air pressure release and lockout device is also included.
For all models except EMN. Can be used on models EMN-12 or
EMN-14 if equipped with optional power feed kit........................(NAC3000-NO3G-3) |
$
190.00
|
|
|
|
|
Automatic
drain assembly for filter bowl, drains by liquid level. (Recommended
in areas of high humidity)................…..………….(NAD43) |
$
90.00 |
|
One
gallon PNEUMALUBE™ puenumatic lubricant.....…(PUENUMALUBE) |
$
27.50 |
|
|
|
4. |
SAWBLADE
LUBRICATION SYSTEMS - Below venturi and Protex™
sawblade lubrication systems are designed for use when cutting
non-ferrous metals only. Use of wax sticks for sawable lubrication
is unsafe. When using Venturi type spray mist system, adequate
ventilation must be used. For all models. When used on models
EMN-12 or EMN-14, an outside source of compressed air is required. |
|
| |
|
|
| |
1- |
Automatic
venturi type spray mist system provides a lubricating mist of
water-soluble oil mixture onto sawable and work piece. With
one gallon reservoir.....................................................................…(B-1163-MN) |
$
335.00 |
|
|
One gallon
water soluble oil for use with venturi type system only......................................................................................…(786) |
$
27.50 |
| |
2
- |
Protex™
automatic pulse type metered sawable lubrication system. Environmentally
friendly system uses a minute quantity of biodegradable, high
lubricity all natural per cycle and is adjustable for both pulse
rate and liquid volume. With one pint liquid reservoir…...................................................................(S040165A-2) |
$
995.00 |
| |
|
One gallon
Protex™ plant based natural lubricant (replaces LB-3000) |
$
68.00 |
|
|
|
5. |
STROKE
COUNTER - Pneumatically operated stroke counter. Digital
display up to six digits. Increases one digit with each cycle
of the saws. Resets to zero. For all models except EMN……..................(703006-003) |
$ 370.00
|
|
|
|
6. |
ULTRAMITRE
- Saw Blade |
|
|
U1480ST 14” 5/8” 80 |
$
230.00 |
|
|
|
7. |
CHIP
BREAKERS - Hard machinable canvas reinforced plastic,
designed to provide maximum support for delicate materials
such as mica laminates, gesso coatings, foil and paper laminates
on MDF. Helps to prevent tearout and chipping on critical
edges at the point of sawtooth exit. For models EMN-12, EMN-14,
MN-100, MN-200, MN-300, MN-400 only. |
|
|
|
|
| |
1
- |
Ground
steel one-piece front fence with replaceable phenolic insert
to support back edge of material. …............................…(P-6465-3-MN) |
$
195.00 |
| |
2
- |
Phenolic
scrap support. Fits into throat of saw to support scrap piece……………………………………….................….….(MN00G040) |
$
80.00 |
| |
3
- |
Hard maple
scrap support. Fits into throat of saw to support scrap piece.
For model EMN-14 only ………….......................
(EMN30037) |
$
95.00 |
| |
4
- |
Phenolic
table plates, one on each side of sawblades to support bottom
surface of material. Primarily used when mitering when fully
wrapped MDF mouldings….....................................................…(P-6834-MN) |
$ 125.00
|
|
|
|
8. |
PNEUMATIC
HOLD DOWN CLAMPS - Vertically mounted, adjustable
pneumatic hold down clamps provide substantial holding power
for difficult to hold materials. Provided with shut-off clocks,
replaceable rubber clamp pads and spring return action. For
all models except EMN. Clamps can be provided for the model
EMN if an outside source of regulated compressed air is available……….............................................................(S-6876-MN) |
$ 465.00
|
| |
|
|
| |
1
- |
Button
return circuit. Clamps only release after full retraction of
sawblades………………................................................…(7176-MN) |
$
90.00 |
| |
2
- |
Mini pressure
regulator with gage installed on clamps…......(7177-MN) |
$
95.00 |
| |
3
- |
Horizontal
work clamps, pulls material from behind toward fence. Ideal
where vertical clamps are not suitable. |
|
|
|
Includes
button return circuit………............................……(7178-MN) |
$
895.00 |
|
|
|
9. |
HYDRO-PNEUMATIC
SAW FEED - Provides a precise metered feed rate for
superior cutting performance especially on aluminum and vinyl
extrusions. Includes adjustable flow controls. The unit may
be set for rapid feed to the point of cutting, and then controlled
feed begins. |
|
|
|
|
|
For
models MN-100, MN-200, MN-300, MN-400, MN-101, MN-201 &
MN-301 only……………………........................................…………..(HYCK-PMN) |
$
840.00 |
|
For
models MN-102, MN-202, MN-302, MN-402, MN-502 & MN-602 only………………………….........................…….…………...(HYCK-VMN) |
$
975.00 |
|
Remote
mounted, cylinder check speed control. Speed control adjustment
knob is conveniently located on machine for front panel. Ideal
for frequent feed rate changes…….......................................................................... |
$
175.00 |
|
|
|
10. |
THK
HIGH PERFORMANCE PACKAGE - For the ultimate in mitering
quality, combined with no maintenance sawhead pivot and saw
spindle assemblies. Package includes sealed high precision,
low friction, large, diameter cross roller sawhead pivot bearings,
polyvee flat belt drive with ball bearing idlers, and sealed
high-speed spindle bearings. For models MN-100, MN-200, MN-300,
MN-400, MN-101, MN-201 & MN-301 only….....…(THK) |
$1,875.00 |
|
|
|
11. |
ACCURGAGES™ -
A selection of length gage for accurate measurements of outside,
rabbets or inside dimensions. |
|
|
|
|
A- |
#2G
ACCURCUT™ GAGE - 48” long, all steel
construction, complete with quick set tooth lock stop, factor
bar, tape scale mounting bracket and support leg. Specify
for left or right hand mounting and for inch or metric tooth
spacing………..............................................................………….. |
$1,125.00
|
| |
|
|
| |
1
- |
Same as
above, 96” long…………...........................................……… |
$1,325.00 |
| |
2
- |
#2G extra
length. Minimum add on in 24” increments. Per additional
24” of length. Maximum to 20’……......................................................... |
$
205.00 |
| |
3
- |
Precision
machined “Vee” block installs on stop fact to prevent
damage to mitered tips. Also help to maintain accuracy
over long lengths……..…..............................................................(OGIII025)
|
$ 98.00
|
| |
4
- |
Extra width
bed for use with model MN-400, EMN-14, MN-402, MN-502 &
MN-602…………………......................................………………………….. |
$
250.00 |
| |
5
- |
Half scales
with adhesive backing. 12” to 108” left or right………………….........…………………………………..…(A-1295-G) |
$
29.50 |
| |
6
- |
Horizontal
turret stop assembly with 12 positions, replaces standard stop
supplied…………………......................................…..(S-6258-G) |
$
205.50 |
| |
7
- |
Rotary
gatling type turret stop assembly with 12 positions, replaces
standard stop supplied……….........................…………….
(2GII0029) |
$
240.00 |
| |
8
- |
Electric
digital readout installed on #2G gage. Display mode selection
allows readout in fractions, decimals or millimeters. Large
LCD numerical display. Complete and factory installed on new
gage, to 96” only………………….................................................……...(P-200-8) |
$1,495.00
|
| |
9
- |
Electric
digital readout to 120”, display changes to decimals after
99”……………….....................……………………………..…(P-200-10) |
$1,645.00 |
| |
10
|
Electric
digital readout to 144”, display changes to decimals after
99”….............................………………………….......………(P-200-12) |
$2,135.00 |
|
|
|
B - |
#6G
VISI-MITER™ GAGE - 48” long, complete
with color-coded polycarbonate gage strips, adjustable stop
and support leg. For right hand use only. For all models.
When used on model EMN-14 add extra gage bed width…………............................................................………..(RH6G-48) |
$ 735.00
|
| |
|
|
| |
1
- |
Same as
above, 72” long……………...............................…(RH6G-72) |
$
840.00 |
| |
2
- |
Same as
above, 96” long……….......................………..…...(RH6G-96) |
$
995.00 |
| |
3
- |
Same as
above, 182 cm long, color coded stainless steel scale with metric
calibrations form 10cm to 182cm. |
|
| |
|
For right
hand use only……………………................………(RH6G-182) |
$
895.00 |
| |
4
- |
#6 extra
gage scales with capacity to 6”, for use with model EMN-14
only………….................................................................................... |
$
110.00 |
| |
5
- |
Stainless
steel gage scales in place of standard polycarbonate scales
– Recommended for use when cutting aluminum or high production
applications……......................................................…………………… |
$ 120.00
|
| |
6
- |
Pow-R-Lok™
Stop. Replaces standard stop. Pneumatically operated, single
button activation, positive locking. Ideal for frequent size
changes. Nylon glide buttons for ease of movement. For air operated
models only……………...............................................................(6GRH0040) |
$ 268.00
|
| |
7
- |
Pow-R-Lok™
Stop. Same as above but is provided as a kit for installation
older machines with the 6G Gage (6GRH0040K) |
$
310.00 |
|
|
Production
flip stops for simultaneous multiple position stop gaging……………….............……………………………….….(S-5885-G) |
$
33.50 |
|
8
- |
Multi-Flip™
three Position Flip Stop, 1”, 2” and 3” offsets,
(other offsets are available on special order)…................................………(6GIII040) |
$
245.00 |
|
|
|
C
- |
#9G
DIGI-MITER™ ELECTRIC GAGE - PATENT #5,327,653
- Digital electronics accurately displays inside “rabbet”
or outside “top-to-tip” size on large LCD numerical
display. Mode selection allows display in millimeters, tractions
or decimals. Works equally well with flat back, reverse or
multiple rabbet mouldings. Battery powered, no electrical
connections required. For all models. For right hand use only.
When used on model. EMN-14 add extra bed width as below. |
|
| |
|
|
| |
1
- |
#9G electronic
rabbet measurable gage, 48” long……………
(RH9G-48) |
$2,750.00 |
| |
2
- |
#9G automated
electronic length measurement gage,
72” long............................................................................(RH9G-72) |
$2,950.00 |
| |
3
- |
#9G electronic
rabbet measurement gage, 96” long......….…(RH9G-96) |
$3,250.00 |
| |
4
- |
#9G extra
bed width capacity to 6”, for use with model EMN-14 only… |
$
250.00 |
|
|
|
D
- |
#10G
DIGI-MITER™ AUTOMATED ELECTRIC GAGE - PATENT
#5,327653 – Digital electronics accurately displays
inside outside “tip to tip” or “rabbet”
size on larger LCD numerical display. Mode selection allows
display in decimals, fractions or millimeters. Automated stop
positioning via powerful service motor. Standard gage is for
overall “tip to tip” dimensions. Rabbet or inside
dimensions are possible with the optional rabbet sensor handle.
Keypad data entry. Requires 115/120 volt, 1 phase, 60 cycle
electrics. Specify for left or right hand mounting when ordering.
When used on the Pistorius model EMN-14 or similar machines,
add extra bed width a listed below. For all models. |
|
|
|
|
| |
1
- |
#10G automated
electric length measurement gage,
48” long………….......................................................….(RH10G-48) |
$5,195.00 |
| |
2
- |
#10G automated
electric length measurement gage,
72” long……………….....................................................(RH10G-72) |
$5,395.00 |
| |
3
- |
#10G automated
electric length measurement gage,
96” long……………....................................................….(RH10G-96) |
$5,650.00 |
| |
4
- |
#10G extra
bed width capacity to 6”, for use with model EMN-14 only… |
$
250.00 |
| |
5
- |
Rabbet
sensor handle, solid-state circuit board and software……… |
$
600.00 |
|
|
|
|
Note:
The 10G automated electric rabbet measurement gage is also
available with PC interfaces for downloading cut lists from
order entry programs such as FullCalc. SpecialtySoft, etc…
Full specifications and pricing on application, some custom
programming may be necessary. Call for further details. |
|
|
|
|
12. |
CLAMP
ON SUPPORT LEG FEET - Set of two cast aluminum feet
for adjustable support legs. Facilities bolting to floor. |
|
|
For
all gages and infeed work supports……................……..(CA-5234-1-G) |
$
55.00 |
|
|
|
13. |
INFEED
WORK SUPPORT - Ideal for use as a layup table for
infeeding lengths of extrusion or moulding. Constructed of
3/16” thick-formed steel with a 5” wide bed. Complete
with adjustable support leg. Standards length is 96”…………......................................................................…(S-7022) |
$
295.00 |
|
|
|
14. |
INFEED
ROLLER CONVEYOR - For your ease in infeeding long,
heavy or delicate materials. Steel frame with ball bearing
steel rollers installed on 12” centers. Standard unit
is 10’ long and is supplied complete with support leg
and mounting bracket. |
|
|
Conveyor
width is 6”…………….......................................…….(S-7031-G) |
$
585.00 |
|
Optional
non marking plastic covered steel rollers in place of standard
rollers…......................................................................…….(HSTT200-L) |
$
130.00 |
|
|
|
15. |
WRAP
AROUND NOTCHING FIXTURE - A two-position fixture
designed for sequential notching of plastic or aluminum extrusions
for wrap around frames. In one position the unit will notch
without cutting through and in the second position will allow
the saws to miter through. Positions are changed via a quick-change
lever. |
|
|
For
models MN-101, MN 201, MN-301, MN-202 & MN-302 only……...............................................................………….(S-5110-MN) |
$
895.00 |
|
|
|
16. |
COMPOUND
FIXTURE - Special support fixtures allow the machine
to be used for compound angle cuts for shell or scoop mouldings.
Supplied with a high front and retaining bearing to assure
repetitive angle cuts. |
|
|
For
model EMN only…………............................……………(S-7036-EMN) |
$
225.00 |
|
For
all models except EMN…..............................……………(S-7036-MN) |
$
140.00 |
|
|
|
17. |
SCRAP
AND CHIP PAN - Constructed of heavy gage steel and
designed to fit between the legs of the machine. Catches scrap
material, chips and drippings from venturi type spraymist
systems. Ideal for the quick efficient removal of scrap waste.
For all models except EMN-12, EMN-14, MN-402, MN-502 &
MN-602………….......................................………(S-1294-MN) |
$
150.00
|
|
|
|
18. |
ENCLOSED CABINET BASE - Enclosure including
front and rear removable sheet metal panels are a large capacity
put our scrap drawer mounted on wheels. Handles are provided
on each side of dumping. For models MN-100, MN-101, MN-200,
MN-201, MN-300, MN-400, MN-102, MN-202 & MN-302 only………........................................................................................… |
$
475.00
|
|
|
|
19. |
SAWDUST
EXHAUST DUCTS - A combined unit of heavy gauge steel
with two 4” outlets for the efficient removal of sawdust.
Requires approximately 850CFM. See bulletins V & TC for
information on Pistorius dust collection systems. |
|
| |
|
|
| |
1
- |
For models
MN-100, MN-101, MN-200, MN-201, MN-300, MN-301 and MN-400 only,
with two 4” outlets…..............................….(S-4860-MN) |
$
155.00 |
| |
2
- |
For models
EMN-12 & EMN-14 with two 4” outlets……......(EMN20038) |
$
155.00 |
| |
3
- |
For models
MN-102, MN-202, MN-302, MN-402, MN-502 & MN-602 only with
two 4” outlets……...................................................... |
$
225.00 |
| |
4
- |
4”
ID x 12’ long reinforced flexible rubber hose……………......….(86A-4) |
$
68.00 |
| |
5
- |
5”
ID x 12’ long reinforced flexible rubber hose……………......….(86A-5) |
$
85.00 |
| |
6
- |
6”
ID x 12’ long reinforced flexible rubber hose………......……….(86A-6) |
$
95.00 |
| |
7
- |
4”,
5” or 6” stainless steel adjustable hose clamp…….........…….(6880) |
$
3.75 |
| |
8
- |
6”
x 4” x 4” reducing Y fitting…..............................……………….(904) |
$
85.00 |
| |
9
- |
5”
x 4” x 4” reducing Y fitting…………….................……………….(903) |
$
75.00 |
|
|
|
20. |
AIR
OPERATION FOR MODEL EMN - Kit provides are cylinder,
speed control valves, footpedal with guard and all necessary
fittings and hose for installation on machine. Six holes must
be drilled for installation if not factory installed. Air
pressure must be regulated to approximately 50 psi. Should
be used in conjunction with the optional airline filter, regulator
and lubricator – see accessory on 3 on front page. |
|
|
Installed
on machine................................……………………(S-7204-EMN) |
$
670.00 |
|
In
kit form, not installed……….................................……….(S-7052-EMN) |
$
595.00 |
|
|
|
21. |
TOP
CYLINDER MOUNT - Relocates drive cylinder on top
of the machine table to allow clearance for a large scrap
bin under the machine. For models MN-100, MN-200, MN-300 and
MN-400 only…....................…………(7476) |
$ 995.00
|
|
|
|
22. |
ADJUSTABLE
HEIGHT SUPPORT - Designed for supporting tall mouldings
and extrusions with unusual profiles. Suitable for cutting
reverse compound angles. Adjusts vertically and horizontally. |
|
|
For
models except EMN………….............................…………(S-7035-MN) |
$
115.00 |
|
For
models EMN only…............................…………………..(S-7035-EMN) |
$
165.00 |
|
|
|
23. |
SCHEDULE
BOARD - Work schedule clip board 8-1/2” x 12”
with mounting bracket and hardware.
For all models…………..............................................……….(S-6878-MN)
|
$ 95.00
|
|
|
|
24. |
MAINTENANCE
& SERVICE TOOL KIT - Heavy gauge steel tool box
with lid and lock. Supplied complete with spare drive belts,
cylinder and footpedal packing kits, adjustment wrenches,
pivot wear rings, link bolts and cartridge grease gun with
grease cartridges…………………….......…….(S-7037-MN) |
$
185.00
|
|
|
|
25. |
SPECIAL
FIXTURES - Custom made support fixturing can be provided
to suit your material of required. Sample, drawings and specifications
should be provided for quotation. |
|
|
|
|
26. |
EXPORT
PACKING - Machine wrapped in protective plastic and
packed in a sealed shipping container. |
|
|
For
models EMN-12, EMN-14, MN-100, MN-200, MN-300, MN-400, MN-101,
MN-201 & MN-301……….........................................………….(EXP-MNP) |
$
155.00 |
|
For
models MN-102, MN-202, MN-302, MN-402 & MN-502 & MN-602……………….......................……………………..……………(EXP-MNV) |
$
255.00 |
|
|
|
|
Note:
Accurcut™, Accurgauges™, AccurStop™,
Visi-Miter™, Protex™, Pow-R-Lok™, Digi-Miter™,
Multi-Flip™ and MiterMaster® are trademarks of Pistorius
Machine., Inc. |
|
|
|
|
